96 lines
6.3 KiB
Properties
96 lines
6.3 KiB
Properties
# Licensed to the Apache Software Foundation (ASF) under one or more
|
||
# contributor license agreements. See the NOTICE file distributed with
|
||
# this work for additional information regarding copyright ownership.
|
||
# The ASF licenses this file to You under the Apache License, Version 2.0
|
||
# (the "License"); you may not use this file except in compliance with
|
||
# the License. You may obtain a copy of the License at
|
||
#
|
||
# http://www.apache.org/licenses/LICENSE-2.0
|
||
#
|
||
# Unless required by applicable law or agreed to in writing, software
|
||
# distributed under the License is distributed on an "AS IS" BASIS,
|
||
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||
# See the License for the specific language governing permissions and
|
||
# limitations under the License.
|
||
|
||
abstractStream.windowSizeDec=连接[{0}]，流[{1}]，将流控制窗口减少[{2}]到[{3}]
|
||
abstractStream.windowSizeInc=连接 [{0}], 流 [{1}], 增加流量控制窗口[{2}] 到 [{3}]
|
||
abstractStream.windowSizeTooBig=连接[{0}]，流[{1}]，窗口大小从[{2}]增加到[{3}]，超过了允许的最大值
|
||
|
||
connectionPrefaceParser.mismatch=请求了新的远程流ID[{0}]，但所有远程流都必须使用奇数标识符。
|
||
|
||
connectionSettings.debug=连接[{0}]，参数类型[{1}]设置为[{2}]
|
||
connectionSettings.enablePushInvalid=连接[{0}]，请求的enable push[{1}]值不是允许的值之一（零或一）
|
||
connectionSettings.headerTableSizeLimit=连接 [{0}]，尝试将 header 表大小设置为 [{1}]，但限制为 16k
|
||
connectionSettings.maxFrameSizeInvalid=连接[{0}]，请求的最大帧大小[{1}]在[{2}]到[{3}]的允许范围之外
|
||
connectionSettings.unknown=连接[{0}]，标识为[{1}]和值为[{2}]的未知设置被忽略
|
||
|
||
frameType.checkPayloadSize=对帧类型[{1}]来说，负载[{0}]是无效的
|
||
frameType.checkStream=无效的帧类型[{0}]
|
||
|
||
hpack.integerEncodedOverTooManyOctets=HPACK 可变长度整数编码过多的八位字节，最大值为[{0}]
|
||
hpack.invalidCharacter=代码点[{1}]处的Unicode字符[{0}]无法编码，因为它超出了允许的0到255范围。
|
||
|
||
hpackdecoder.tableSizeUpdateNotAtStart=任何表大小的更新都必须在头块开始时发送。
|
||
|
||
http2Parser.headerLimitCount=连接[{0}]，流[{1}]，标题太多
|
||
http2Parser.headerLimitSize=连接[{0}]，Stream[{1}]，总的头信息尺寸太大
|
||
http2Parser.headers.wrongStream=连接[{0}], 头部信息对于流[{1}]正在进行但对于流[{2}]的一帧已经收到了。
|
||
http2Parser.nonZeroPadding=连接[{0}]，流[{1}]，非零填充
|
||
http2Parser.preface.invalid=出现无效连接
|
||
http2Parser.processFrame.unexpectedType=需要帧类型[{0}]，但收到帧类型[{1}]
|
||
http2Parser.processFrameData.window=连接[{0}]，客户端发送的数据比流窗口允许的多
|
||
http2Parser.processFrameHeaders.decodingDataLeft=数据在HPACK解码后依然保留 - 它本应该被消费掉
|
||
http2Parser.processFrameHeaders.payload=连接：[{0}]，流：[{1}]，正在处理[{1}]大小的头文件负载
|
||
http2Parser.processFramePriority.invalidParent=连接[{0}]，流[{1}]，流可能不依赖于自身
|
||
http2Parser.processFramePushPromise=请求了新的远程流ID[{0}]，但所有远程流都必须使用奇数标识符\n\
|
||
\n
|
||
http2Parser.swallow.debug=连接：[{0}]，流：[{1}]，吞下[{2}]字节
|
||
|
||
stream.closed=连接[{0}]，流[{1}]，一旦关闭就无法写入流
|
||
stream.header.debug=连接[{0}]，流[{1}]，HTTP标头[{2}]，值[{3}]
|
||
stream.header.noPath=连接[{0}]，流[{1}]，[：path]伪标头为空
|
||
stream.header.required=连接 [{0}], 流 [{1}], 缺少一个或多个必要的头文件
|
||
stream.header.unknownPseudoHeader=收到连接[{0}]，流[{1}]，未知伪标头[{2}]
|
||
stream.inputBuffer.readTimeout=等待从客户端读取数据超时
|
||
stream.inputBuffer.reset=流.重置
|
||
stream.inputBuffer.signal=读线程在等待时，数据被添加到inBuffer中。 发信号通知该线程继续
|
||
stream.reprioritisation.debug=连接[{0}]，流[{1}]，独占[{2}]，父[{3}]，权重[{4}]
|
||
stream.reset.fail=连接[{0}]，流[{1}]，重置流失败
|
||
stream.writeTimeout=等待客户端增加流控制窗口以允许写入流数据的超时
|
||
|
||
streamProcessor.cancel=连接到[{0}]，Stream [{1}]，
|
||
streamProcessor.error.connection=连接[{0}]，Stream[{0}]，处理中发生错误，对连接来说是致命的。
|
||
streamProcessor.service.error=请求处理期间出错
|
||
|
||
streamStateMachine.debug.change=(:连接[{0}]，流[{1}]，状态从[{2}]更改为[{3}]
|
||
|
||
upgradeHandler.allocate.left=连接[{0}]，流[{1}]，[{2}]字节未分配 - 尝试分配给子项
|
||
upgradeHandler.allocate.recipient=(:连接[{0}]，流[{1}]，潜在接收者[{2}]，权重为[{3}]
|
||
upgradeHandler.goaway.debug=连接[{0}]，离开，最后的流[{1}]，错误码[{2}]，调试数据[{3}]
|
||
upgradeHandler.init=连接[{0}]，状态[{1}]
|
||
upgradeHandler.ioerror=连接[{0}]
|
||
upgradeHandler.pingFailed=对客户端发送ping 链接失败.
|
||
upgradeHandler.prefaceReceived=连接[{0}]，从客户端收到连接准备。
|
||
upgradeHandler.pruneIncomplete=连接[{0}]，流[{1}]，无法完全修剪连接，因为有[{2}]个活动流太多
|
||
upgradeHandler.prunedPriority=连接[{0}]已经成为了属于优先级树中未使用的流[{1}]
|
||
upgradeHandler.rst.debug=连接[{0}]，流[{1}]，错误[{2}]，消息[{3}]，RST（关闭流）
|
||
upgradeHandler.sendPrefaceFail=连接[{0}]，给客户端发送前言失败
|
||
upgradeHandler.socketCloseFailed=关闭 socket 错误
|
||
upgradeHandler.stream.closed=流[{0}]已经关闭了一段时间
|
||
upgradeHandler.stream.even=\ 请求了新的远程流ID[{0}]，但所有远程流都必须使用奇数标识符\n\
|
||
\n
|
||
upgradeHandler.tooMuchOverhead=连接[{0}]，开销过大，连接将关闭
|
||
upgradeHandler.upgrade=连接[{0}], HTTP/1.1 升级到流[1]
|
||
upgradeHandler.upgrade.fail=):连接[{0}]，http/1.1升级失败
|
||
upgradeHandler.upgradeDispatch.entry=条目，连接[{0}]，SocketStatus [{1}]
|
||
upgradeHandler.upgradeDispatch.exit=退出，连接[{0}]， SocketState[{1}]
|
||
upgradeHandler.windowSizeTooBig=连接[{0}]，流[{1}]，窗口太大
|
||
upgradeHandler.writeBody=连接 [{0}],数据流[{1}], 数据长度[{2}]
|
||
upgradeHandler.writeHeaders=连接 [{0}]，流 [{1}]
|
||
|
||
windowAllocationManager.notify=连接[{0}], 流[{1}], 等待类型[{2}], 通知类型[{3}]
|
||
windowAllocationManager.waitFor.ise=连接[{0}], 流[{1}], 已经准备好
|
||
|
||
writeStateMachine.ise=处于 [{1}] 状态时调用 [{0}()] 方法是非法的
|